ENGLISH
FRANÇAIS
DEUTSCH NEDERLANDS ESPAÑOL
ITALIANO
РУССКИЙ
SVENSKA
TROUBLESHOOTING
PROBLEM |
| CAUSE |
| SOLUTION | |
|
|
| |||
NO SOUND | • Power AC lead unplugged or power not | • Check if AC lead is plugged in and power | |||
|
| switched on |
| switched on | |
|
|
|
|
| |
| • | Mute on | • | Switch off Mute | |
|
|
| |||
| • Headphones inserted | • Unplug the headphones | |||
|
|
|
|
| |
NO SOUND ONE CHANNEL | • | Balance control not centered | • | Center Balance control | |
|
|
| |||
| • Speaker not properly connected or damaged | • Check connections and speakers | |||
|
|
| |||
| • Input lead disconnected or damaged | • Check leads and connections | |||
|
|
|
|
| |
WEAK BASS / DIFFUSED STEREO IMAGE | • | Speakers wired out of phase | • | Check connections to all speakers in the | |
|
|
|
| system | |
|
|
|
|
| |
REMOTE CONTROL HANDSET NOT | • | Battery flat, or incorrectly inserted | • | Check or replace battery | |
WORKING |
|
|
|
| |
• | IR transmitter or receiver windows obstructed | • | Remove obstruction | ||
| |||||
|
|
|
| ||
| • IR receiver in direct sun or very bright | • | Place unit away from direct sun, reduce | ||
|
| ambient light |
| amount of ambient light | |
|
|
|
|
| |
POWER/PROTECTION LED TURNS RED | • | Amplifier has overheated | • | Turn amplifier off, make sure ventilation | |
DURING OPERATION |
|
|
| slots on top and bottom of amplifier are not | |
|
|
|
| blocked. After amplifier has cooled down, | |
|
|
|
| turn back on. | |
|
|
|
|
| |
