PROGRAMMING (OPTIONAL)
Programming the system Date and Time.
The User Program Mode may also be used to set the system Date and Time which display on the keypad.
AC TI V ATE
P R O GR AM Y/N
EN TE R DATE 0 0/ 00/ 00
EN TE R DATE 0 7/ 29/ 00
Enter the User Program Mode
1.Enter your User Code, then press Rto enter the Function Mode.
2.Answer NO (Q) until “ACTIVATE PROGRAM Y/N” is displayed, then press YES (P).
3.“ENTER USER CODE” will display, press NEXT (P) until the keypad displays the “Enter Date” screen.
Programming the Date
1.At the Enter Date screen, simply punch in the correct date using the numeric keypad buttons.
For example, for July 29, 2000, enter: 072900
2.Press Uto save the Date.
E N TE R TI ME
( 12 : 00 A)
E N TE R TI ME
( 06 : 30 P)
Programming the Time
After entering in the Date, press NEXT (P) for the Time Entry screen.
1.At the Enter Time screen, simply punch in the correct time using the numeric keypad buttons and if necessary, press any numeric button to change the AM display to PM (or vice versa).
For example, for 6:30 PM, enter: 0630(0if necessary)
2.Press Uto save the Time.
26
