FUNCTION MENU
AC TI V ATE |
|
BE LL TEST | Y/N |
|
|
|
|
D I S PL AY |
|
S YS TR B L | Y/ N |
|
|
|
|
D I S PL AY |
|
F I RE AL ARM | Y/N |
|
|
|
|
D I S PL AY |
|
F I RE T R B L | Y/ N |
|
|
|
|
AC TI V ATE |
|
C H IM E | Y/ N |
|
|
|
|
AC TI V ATE |
|
W ATC H | Y/ N |
|
|
16
Activate Bell Test? Activates the alarm (while disarmed) for about 2 seconds and performs a battery test. If the alarm does not sound, call for service.
•If the battery is low, a “LOW BATTERY
Display System Troubles? Displays 1- or
troubles. (For
Display Fire Alarms? Displays alarms that have occurred on the Fire Zone(s). Press the NEXT and PRIOR Buttons to scroll zones (required for
Display Fire Troubles? Displays trouble conditions that have been detected on the Fire Zone(s). Use NEXT(P) and PRIOR (Q) to scroll zones (required for GEM-
P3200/9600 panels.
Activate Chime? The Chime Mode will sound a tone at the keypad when the programmed zone is faulted while disarmed. To deactivate the Chime Mode,
The Chime Mode is disabled while armed.
Activate Watch Mode? (Optional - Watch Mode programmed? YES NO) This optional feature simultaneously turns on all zones designated as Day Zones, which will cause an indication at the keypad if a zone is opened while the system is disarmed. To deactivate the Watch Mode, arm, then disarm. All Day Zones will revert to regular Burglary Zones. Note: The Watch Mode is disabled while armed. (Note: This function available with
