TURNING OFF THE AL ARM (DISARMING) WHEN RETURNING
| Disarming the System | |
D I S AR M S YS TE M | 1 Enter your premises through the Entry/Exit door. The keypad will sound a steady tone to | |
E N TRY TI M E X X X | remind you to disarm the system before your Entry Delay time expires. | |
| 2 Enter your User Code and press U. The red ARMED light will go out, indicating that the | |
| ||
| system has been disarmed. If you enter an invalid code, the keypad will beep 4 times, | |
I N V AL I D EN TRY | ||
signifying an error. | ||
TR Y AG AI N | the keypad will emit a pulsing warning tone. | |
| Alarm Indication / Silencing an Alarm | |
| ||
| If the red ARMED light is flashing and “ALARM” is displayed, an alarm occurred while you were | |
**** AL AR M **** | ||
out. Proceed with caution! If you suspect that an intruder may still be on the premises, leave | ||
| immediately and call authorities from a neighbor's phone. | |
| To silence an audible alarm: | |
0 2 - B ACK DOO R | 1 Enter your code and press U. After the system is disarmed, the window will continue | |
| to display “ALARM” followed by the zone(s) violated. | |
| 2 To reset the display, note the zones violated, then press C. | |
0 3 - LI V IN G R OO M | ||
Ambush (Optional) Your Ambush Code Type is: TYPE 1 (Prefix) TYPE 2 (Unique) | ||
| ||
| My Ambush Code is ___________________ | |
|
If an intruder forces you to disarm your system, enter your Ambush Code and press U. There are two types of Ambush Codes: (1) A
Example Type 1 (Prefix): If your User Code is 1234 and your Ambush Code is 99, press 991234U.
Example Type 2 (Unique): If your User Code is 1234 and your Ambush Code is 8899, press 8899U
Using your Ambush Code will send a silent alarm to the central station. The red ARMED light will go out and the window will display “SYSTEM READY” as if the system were normally disarmed. There will be no indication that a silent alarm has been sent.
10
