Napco Security Technologies GEM-K1CA System Trouble Error Codes, Action, Indication, Condition

SYSTEM TROUBLE ERROR CODES

Trouble	System Trouble	Action
Indication	Condition
E10-NN	Keypad Response Failure	Call installing company for service.
E11-NN	Keypad Tamper	A keypad has been removed from the wall. Call installing company for service if
		problem cannot be repaired.
E12-NN	Expansion Zone Module	Call installing company for service.
	Response Failure
E13-NN	Expansion Module Tamper	The cover has been removed from a zone expansion module. A problem has been
		detected with an Expansion Module. Call installing company for service.
E14-NN	Relay Board Response Fail-	NN= Relay Board Number. Call installing company for service.
	ure
E15-NN	RF Transmitter Tamper	Wireless Transmitter Tamper Cover removed. NN=Transmitter Number. Call installing
		company for service.
E16-NN	Wireless Receiver Jam	A problem has been detected with the wireless receiver. Call installing company for
		service.
E17-NN	Receiver Tamper Condition	Call installing company for service.
E18-NN	KeyFob Transmitter Low	The batteries (2) in the wireless KeyFob transmitter indicated are low and should be
	Battery	replaced. The replacement battery is the #386 watch battery.
		Warning: Replace batteries only with the same type as specified above. Use of another
		battery may present a risk of fire or explosion. Do not recharge or disassemble battery, or
		dispose of in fire.

35