IMPORTANT: Do not operate the appliance when empty.

-Before mixing hot preparations, remove the container from the heat source. For best results, there is no need to move the blender shaft around in the prepara- tion. Instead insert the shaft in the centre of the container with the blender head submerged halfway down in the food.

-For stringy ingredients (leeks, celery, etc.), clean the shaft regularly during the preparation, ensuring that you follow the safety instructions for dismantling and cleaning the appliance.

-When making fruit-based preparations, slice the fruit and remove the cores and any stones beforehand.

-Do not operate the appliance to prepare hard ingredients (sugar, chocolate, cof- fee, ice-cubes).

-Do not operate the mixing foot (C) at TURBO speed for more than 20 seconds.

Mini chopper 150 mL (depending on model): FIG E & 5

-Fit the blades (E2) onto the drive pin of the bowl (E1).

-Place the ingredients in the bowl (E1) then fit the inner cover (E3) then the lid (E4).

-Fit the motor unit (A) onto the lid (E4).

-Plug in the motor unit (A) and press the speed start button (B2) and process food.

-Remove the motor unit (A) then the lid (E4) then the inner cover (E3).

-Remove the blades (E2), holding it by its plastic part.

-After use, remove the ingredients.

-Do not operate this accessory when empty or for more than 10 seconds.

Chopper 500 mL (depending on model): FIG F & 6

-Place the bowl (F1) on the anti-slip base (F4).

-Fit the blades (F2) onto the drive pin of the bowl (F1).

-Place the ingredients in the bowl (F1) then fit the cover (F3).

-Fit the motor unit (A) onto the cover (F3).

-Plug in the motor unit (A) and press the speed start button (B2).

-Remove the motor unit (A) then the cover (F3).

-Remove the blades (F2) holding it by its plastic part.

-After use, remove the ingredients.

-Do not operate this accessory when empty or for more than 30 seconds.

Multi-wire whisk (depending on model): Fig G & 7

-Fit the multi-wire whisk (G2) onto the reducer (G1).

-Fit the reducer (G1) onto the motor unit (A).

-Turn until it is locked in place.

-After use, unscrew the reducer (G1) and remove the whisk (G2).

14

Page 14
Image 14
Tefal HB856A40 manual Important Do not operate the appliance when empty, Mini chopper 150 mL depending on model FIG E