Napco Security Technologies GEM-K2AS manual Cant, Armznf, Armrst

ARMING AW AY: SETTING THE ALARM WHEN LEAVING

	CAN'T/
A C O N	ARM
	CAN'T/
A C O N	ARMZNF

Priority Arming. If you attempt to arm with a faulted Priority Zone, a 3-second tone will sound at the keypad, and "CAN'T ARM" will display in the window, indicating that the trouble(s) must be corrected before the panel can be armed. A zone selected as Priority Zone with Bypass (check your Alarm Plan) may be bypassed if in trouble. If the problem cannot be corrected immediately, press C, then arm the panel. A 3 second beep will

sound at the panel to indicate arming with a Priority Zone in trouble. Be sure to have the trouble repaired as soon as possible.

CAN'T/

A C O N ARMSIL

Silence Alarm. If you enter your code while the alarm is sounding the message "CAN'T/ARMSIL" will be displayed. The system will silence the alarm and will be ready to be armed again.

CAN'T/

A C O N ARMSND

T R O U B L E	CAN'T/
A C O N	ARMRST

Alarm Sounding. If you are attempting to arm with Easy Arm (Optional) and the alarm is sounding, "CAN'T ARMSND" will be displayed. The alarm will not silence. Only a valid User Code will silence the alarm.

System Trouble. If you enter your User Code with a system trouble present, the message "CAN'T ARMRST" will be displayed. To arm, press Cand the system trou-

bles should disappear.

7