Napco Security Technologies GEM-K2AS manual User

PROGRAMMING (OPTIONAL)

5.Enter the new User Code using the number buttons. If an old code is displayed, simply program over it. Important: To erase the unused

digit(s) of the previous code, press G0.

Note: Pressing Ragain will dis-

play non-programmable "OPTion" and "ACCess" screens. Do not attempt to program these screens as the entries will not be saved.

6.Press Uto save the code in mem- ory. Repeat steps 3-6 for each user.

Note: To void a code, blank out each digit by pressing G0, then

press the Save (U) button.

To Program User Codes

1.Using Number buttons, enter User Number

2.Press R

3.Using number buttons, enter User Code of up to 6 digits.

4.Press Uto save.

5.Press Cto Exit Pro- gram Mode.

User01

Note: Press G, 0to clear character at cursor.

Note: Duplicate Codes are not allowed; therefore a duplicate Code entered in

the LCD Window will erase when Uis pressed.

Programming User Codes

26