Napoleon Fireplaces BGD90NT, BGD90PT 5 1/2, 23 3/4, 60 3/4, Wood Or Drywall, Fireplace framing

15

MINIMUM CLEARANCE TO COMBUSTIBLES

Maintain these minimum clearances to combustibles from fireplace and vent surfaces:

Fireplace framing:

-0” to stand-offs

Combustible Fireplace finishing:

-0” to rear

-29 1/2” recessed depth

-84” from bottom of unit to enclosure top

-2” to top, sides, and bottom of vent pipe*

-84” from bottom of unit to ceiling

Non- Combustible Fireplace finishing:

Front - 5 1/2” to sides of fi replace opening

-23 3/4” to top of fi replace opening * See Venting Section

It is recommended that the walls of the fireplace enclosure be finished. This would ensure that clearance to combustibles is maintained within the cavity.

Non-combustible fi nishing material (i.e. cement board, brick, stone, tile) must be used to fi nish the front of the unit.

FIGURE 29 ! WARNING

Use only non-combustible material such as cement board, ceramic tile, marble, etc. when finishing to the fireplace. DO NOT USE

WOOD OR DRYWALL.

	23 3/4"
	73	1/4"
5 1/2"	5 1/2"
	60 3/4"

!WARNING

Facing and/or finishing material must never overhang into the fireplace opening.

W415-0580 / C / 04.07.08