FIGURE 33
C |
|
|
O |
|
|
N |
|
|
TR |
|
|
O |
| |
| L |
|
| D | |
|
| O |
|
| O |
|
| R |
|
| S |
LOG SHIPPING |
| |
BRACKET |
|
|
FINISHING
DOOR REMOVAL
FIGURE 34
HOOKS
ROD
17
FIGURE 35
HEARTH STRIP
RETAINER
Before the glass door can be removed, the control doors must be opened and the hearth strip and screen assembly must be removed.
With the control doors pulled open, you can now lift the hearth strip up and away from the front of the fi replace. The curtain assembly can be removed by lifting the rod out from the three hooks at the top inside edge of the door open- ing.
SCREWS 
The glass door is secured to the fi rebox with 7 latches. 2 on each side, and 3 across the top plus 2 screws. Pull the handle of the latch forward, then lift the hooks out from the slot in the door frame to release the top and sides of the door. Using a Screw Driver remove the 2 screws in the bottom corners of the door. Lift the door out from the retainer along the bottom of the door. We recommend 2 people remove door due to size and weight. Pull the bottom edge of the door out from the fi replace until the top will pivot forward. Handle
carefully as the door is extremely heavy.
| LOG SHIPPING BRACKET |
FIGURE 36 | Before installing the logs, you must fi rst remove the log shipping bracket. Lift up to remove. |
| Discard once removed. |
LOG
SHIPPING
BRACKET
GLASS/DOOR REPLACEMENT
1. Place the door frame face down careful not to scratch the paint.
2. Center the gasketed glass inside the door frame with the thick side of the
gasket facing up.
3. Bend the glass retainers located along the edge of the door frame over the
gasket holding the glass in place. Careful not to break the glass.
NOTE: Care must be taken when removing and disposing of any broken glass or damaged components. Be sure to vacuum up and broken glass from inside the fi replace before operation.
FIGURE 37
GASKET
GLASS
GLASS
RETAINER 
DOOR FRAME
