Napoleon Fireplaces fireplaces L36 LOUVRE INSTALLATION, Heat Shield Stand-Off Removal, a-c

L36 LOUVRE INSTALLATION

FIGURE 32 a-c A

B

C

15

HEAT SHIELD STAND-OFF

REMOVAL

HEAT SHIELD

FIGURE 33	STAND-
	OFFS

END HEAT SHIELD SHOWN

A CLIPS

HOOD

Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through

When using a non-combustible finishing material, the stand-offs may be removed, by removing the set screw in the centre and sliding the stand-offs out of the mounting clips.

LOGO PLACEMENT

SLOT

FLANGE

C E N T R E

the centre slot.

Remove the backing of the logo supplied and place on the screen

B

C

HINGE

CLIP

SLOT

TA B

SLOT

UPPER LOUVRES

Insert the louvre tabs into the slots located at the top left and right corners of the unit.

LOWER LOUVRES

Insert the hinge clips into the slots located at the bottom left and right corners of the unit.

To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assem- bly back. Lift the clip.

cover, as indicated.

FIGURE 34

W415-0319 / E / 01.17.07