© National Instruments Corporation I-1 NI 7350 User Manual
Index

Symbols

+5 V signal. See Host +5 V signal

Numerics

7350 controller
configuration, 2-1
digital I/O connector
axes 1–4 (figure), 5-15
axes 5–8 (figure), 5-16
digital I/O connectors, overview, 3-4
features, 1-1
hardware, 1-2
hardware overview, 3-1
installation, 2-4
motion I/O connector
axes 1–4 (figure), 5-2
axes 5–8 (figure), 5-3
motion I/O connectors, overview, 3-4
National Instruments application
software, 1-3
optional equipment, 1-4
parts locator diagrams
back panel, 3-2, 3-4
connectors, 3-5
front panel, 3-1, 3-3
processor architecture, 4-1
requirements for getting started, 1-2
RTSI, 1-2
safety information, 2-2
software installation, 2-1
software programming choices, 1-3

A

analog feedback, 4-2
Analog Input <1..8> signal
analog input voltage ranges (table), 5-12
description (table), 5-4
purpose and use, 5-12
Analog Input Ground signal
description (table), 5-4
purpose and use, 5-12
analog inputs, 4-2
signal descriptions, 5-12
wiring concerns, 5-13
Analog Output <1..8> signal
description (table), 5-4
purpose and use, 5-5
Analog Output Ground signal
description (table), 5-4
purpose and use, 5-5
analog outputs, 4-2
Analog Reference signal
description (table), 5-4
purpose and use, 5-5
axes
overview, 4-3
servo axis resources (figure), 4-4
stepper axis resources (figure), 4-4
Axis <1..8> Dir (CCW) signal
compatibility with third-party drives, 5-6
description (table), 5-4
purpose and use, 5-5
Axis <1..8> Encoder Index signal
description (table), 5-4
purpose and use, 5-9
Axis <1..8> Encoder Phase A signal
description (table), 5-4
purpose and use, 5-8
Axis <1..8> Encoder Phase B signal
description (table), 5-4
purpose and use, 5-8