Chapter 3 Configuration and Default Settings
NI VXIpc-882 User Manual 3-22 ni.com
You can use the Device tab to set some basic VXI properties of your device.
Table3-8 lists the default settings for this tab on your VXIpc controller.
You can use the Shared Memory tab to configure the amount of memory
you make available to the VXI bus. Table3-9 lists the default settings for
this tab on your VXIpc controller. The default setting on the controller is to
share no system RAM. After you select one of the shared RAM options,
you can select the amount of RAM you want to share.
You can use the VXI bus tab to set various configurations related to VXI
bus control. Table3-10 lists the default settings for this tab on your VXIpc
controller.
Table 3-8. VXIpc MAX Device Tab Default Settings
Setting Default Value
Logical Address 0
Device Class Message Based
Interrupt Configuration: Number of Handlers 1
Table 3-9. VXIpc MAX Shared Memory Tab Default Settings
Setting Default Value
Shared Memory Do Not Share Memory
Table 3-10. VXIpc MAX VXI Bus Tab Default Settings
Setting Default Value
Bus Settings: Bus Timeout 500 μs
Bus Requester: Release on Request Checked
Bus Requester: Request Level 3
Bus Requester: Operate as Fair Requester Checked
Bus Arbitration: Prioritized Checked