Chapter 6 Common Questions and Troubleshooting
© National Instruments Corporation 6-5 NI VXIpc-882 User Manual
Installing from a DVD/CD-ROM
The NI VXIpc-882 controller supports the installation of Windows XP
from a USB DVD/CD-ROM. However, many other operating systems do
not support installation from a USB DVD/CD-ROM. For example,
Windows 2000 aborts during the install process because it does not have
drivers for the DVD/CD-ROM device.
With DOS drivers, you can install Windows 9x operating systems.
However, only a few USB DVD/CD-ROM drives have DOS drivers.
As an alternative to a USB DVD/CD-ROM drive, you can use an external
SCSI DVD/CD-ROM with a VXI-SCSI adapter.
Note For additional assistance with installing or changing an operating system, refer to
KnowledgeBase 2ZKC02OK at ni.com/support.
ExpressCard/34This section provides information on the installation and removal of
ExpressCard/34 modules.
Installing an ExpressCard/34
You can install an ExpressCard/34 module while the NI VXIpc-882 is
running. The NI VXIpc-882 will automatically detect the card.
ExpressCard/34s are generally marked with a symbol or a label to indicate
which end to insert into the slot. The cards are keyed to prevent incorrect
insertion.
To install an ExpressCard/34, complete the following steps.
1. Hold the card so the top side is facing left.
2. Insert the card until it is completel y seated in its connector. The
connector has an automatic eject mechanism. If you insert the card and
it is ejected, simply re-insert the card until it is seated.
If you encounter too much resistance, do not force the card. Check the card
orientation and try again.
The NI VXIpc-882 will automatically recognize the ExpressCard/34 and
load the appropriate driver(s). Third-party cards may require that you
install additional drivers. Contact your ExpressCard/34 vendor for more
information.