©NationalInstruments Corporation 1-1 PXI-1006User Manual
1
Installing and Verifying Operation
This chapter describes how to unpack the PXI-1006, install a controller,
and verifythat the chassis is operating correctly.

Unpacking the PXI-1006 and Installing a Controller

This installation example assumes you areu sing an embedded PXI
controller.
1. Unpack your PXI-1006 chassis.
2. Makesure th e powerswitch i s in the Standby (Off)posit ion.
3. Plug in the ACpower cord.
Powercords are available from National Instruments, or use a power
cordthat meets the requirements of ANSI/UL817 for use in the United
States, CSA C22.2 21 and 49 for use in Canada, and IEC 227 or 245
for use in the European Union. ACmains power supply cords used
withthe PXI-1006 in other countries must be approved by the authority
havingjurisd iction in that country.