Chapter1 Installingand Verifying Operation
PXI-1006User Manual 1-2 ni.com
4. Install your controller in Slot 1 of your PXI-1006. Install peripheral
cards, if any,in slots 2 through 18.
Figure1-1. InstallingController and PXI Modules
5. Setthe fan speed selector switch (located on the rear of the chassis) to
eitherHI for m aximum cooling or AUTOto employ the temperature
sensing module that controls the fan speed.
6. Poweron the chassis. Verify that all fans become operational.
7. Verifythat your controller boots the operating system.
Note If the chassis does not power on, see Chapter 3, Troubleshooting.
1 PXI-1006 Chassis
2 Peripheral Card
3 Ejector Handle in Down Position
4 PXI Controller
4
1
2
3