Controls and Indicators
Shallow Display
CORC122
Holding M in for two seconds will save the new shallow setting and change the display back to the normal depth mode. Set to zero to disable the alarm.
Deep Alarm
This alarm sounds when the water depth equals or is greater than the set value.
The display will show “d XX.X” which is the current setting for the deep alarm.
Deep Display
CORC123
Pressing s and t will change the deep setting.
Holding M in for two seconds will save the new deep setting and change the display back to the normal depth mode. Set to zero to disable alarm.
Keel Offset
Adjust depth sounder to measure depth below keel or drive instead of sensor.
The display will show “K X.X” which is the current setting for the keel offset. Pressing s and t will change the
