Crossover Nautique 216V/226

Description

1.Bow Navigation Light

2.Bow Lifting Ring

3.Anchor Storage

4.Storage

5.Cruise Control GPS Module

6.Belly Tank Vent

7.Dash Pod and Console

8.Hydro-GateControl and SportShift

9.12-Volt Port/Auxiliary Input

10.Automatic Bilge and Ballast Tank Gauge Panel

11.Engine Compartment Air Intake

12.Tower Board Racks

13.Fuel Tank Fill

14.Watersports Tow Point

15.Forward Bilge Pump Outlet

16.Aft Bilge Pump Outlet

17.Starboard Ballast Tank Vent

18.Storage Trunk/Bilge Water Filters (European market)

19.Anchor Light Receptacle (not included with Flight Control Toweroption)

20.Rudder Shaft Remote Lube Fitting (European market)

21.Stern Lifting Ring

22.Aft Bilge Pump/CE Fire Suppressor

23.Boarding Platform

24.Storage Trunk

25.Engine Cooling Water Intake Strainer

26.Port Ballast Tank Vent

27.Engine Flushing Adaptor

28.Built-in Cooler/T-Handle Drain/Seacock Access Seacocks (shut-off valves, ballast intake/drain, described starboard to port) Engine Cooling, Belly Ballast, Aft-Starboard Ballast, Aft-Port Ballast

29.Tower Watersports Tow Point

30.Cockpit Entrance Tread

31.Fuel Tank Vent

32.Removable Cooler

33.Observer’s Seat/Storage Access

34.Forward Bilge Pump/Storage/Anchor Light Storage

35.Battery Selector Switch/PMA Panel/Breaker Panels

36.Glove Box/Stereo/Auxiliary Input/12V Port

37.Waste Basket

The primary battery is located in the port/aft storage compartment. The optional secondary battery is located in the cockpit starboard storage area.

3-7

Page 65
Image 65
Nautique 90490 manual Crossover Nautique 216V/226, Description