Controls and Indicators
Erasing the User Codes
Make sure the system indicator light is off.
Enter the Master Embedded Code and press and release the 1/2 key and the 7/8 key at the same time to erase the system user codes.
The keyless ignition will now act as if there are no codes in memory. Pressing the START key will unlock the system and pressing the STOP key will lock it without entering a code. Follow the steps in “Programming the Primary User Code” in this section.
Nautique Cruise Control
CORC219
The steering wheel hub cruise control remote has five control buttons:
(ON/OFF)
SET
CNCL (Cancel)
s/RES (increment UP/Resume)
t(decrement DOWN)
