Section 8
Propeller
CAUTION
•A propeller can be very sharp. Be careful when you handle it. Wear a pair of protective gloves when handling any propeller.
•Remove your key from the ignition and remove the Emergency Stop Switch clip from the switch to prevent accidental starting of the engine.
•DO NOT reuse the nylon locknut or the cotter pin.
•DO NOT use a damaged propeller. A damaged propeller can damage your engine and boat.
Removal
1.Remove the cotter pin from the propeller shaft and discard.
2.Wedge a piece of 1" x 4" wood between the propeller blade and the starboard side of the strut and rudder.
3.Remove the nylon locknut and discard.
Use a propeller puller to remove the propeller, then remove the key from the keyway. Inspect the keyways and key for any damage.
A
C
B
CORC047
