Controls and Indicators
Rearview Mirror Adjustment
The rearview mirror can be positioned on the windshield to observe a skier and traffic behind you. The mirror should be lowered when trailering or when using a mooring cover. To reposition the mirror bracket on the windshield frame, loosen the three socket head screws and reposition and tighten the screws in the new location. The center screw (A) should be tightened two turns, followed by the two outside screws (B) being tightened two turns. Follow this sequence until all three screws are tight.
The mirror is installed onto the bracket with a friction clamp (C) to allow mirror adjustment. The friction is controlled by tightening or loosening the friction clamp bolt and manually positioning the mirror to the desired view.
C
CORC0253
FRICTION CLAMP
A
B CORC0254
SOCKET HEAD SCREWS
