Section 4
To exit the adjustment procedure without saving, press and hold M for two seconds when the display shows “NO SAVE.” Multiple runs in opposite directions may be necessary to compensate for errors due to water currents.
No Save Display
CORC119
Depth Sounder Function
To display depth information on the LCD push and release the M until the display shows the depth. The depth sounder is turned on and off with the ignition switch. The depth sounder can also be turned off at any time, while in depth display mode, by pressing and holding M while the depth sounder counts down a three second delay.
The depth display will then indicate “OFF.”
Off Display
CORC120
Press and hold the M to turn the depth sounder back on.
