Care and Maintenance
Cartridge Replacement
1. | Turn off power to the bilge pump. | E | F |
2. | Unscrew the filter bowl (A) by | ||
| turning counterclockwise and pour | D |
|
| any excess bilge water remaining in |
| |
| the bowl back into the bilge. |
|
|
3. | Remove the used cartridge (B) and |
|
|
| dispose of in a suitable container. |
|
|
4. | Inspect the | B |
|
| top of the bowl and replace if worn. |
|
|
5. | Be sure that the seals located on the | C |
|
| top and bottom of new cartridge are |
|
|
| in place and correctly aligned. |
|
|
6. | Place the new cartridge into the | A |
|
| bowl and reattach the bowl to the |
| |
|
|
| |
| filter housing (D) by turning |
|
|
| clockwise. |
| CORC0241 |
7. | Turn on power to the bilge pump. |
| |
|
|
8.Turn on the bilge pump and inspect all connections for leaks.
9.Bleed any air trapped in the housing by using the bleed button
(F) or, if so equipped, the bleed screw (E). Both are located on top of the filter housing.
