Chapter 3: 7401-2xxx and 3xxx Hardware Installation 3-13
Installing Peripherals
This section describes how to install trans action printers and other
peripherals on the 7401-2xxx and 3xxx terminals.

Installing a Transaction Printer

The following printers can connect through a non-powered RS-232 or
USB connector. They all require an external power supply . The
illustrations show how to connect to the 7194 printer. Connecting to the
other three printers is done in the same manner. Refer to the
corresponding printer owner’s guide for illustra t ion s o f th e con n ect o r
locations.
• 7158
• 7167
• 7194
• 7197

RS-232 Installation

1. Connect the Printer Interface Cable to the RS-232 Connector on the
back or on the bottom of the printer.
16632a
RS-232 Connector
Power Connector
Cash Drawer Connector