Chapter 3: 7401-2xxx and 3xxx Hardware Installation 3-41
The following illustration shows th e maximu m allowable dimensionsfor the display opening when the option a l cosm etic bezel is not used.19101
312.5 mm
12.305 in. 13.7 mm
0.540 in.
235.6 mm
9.275 in.
27.5 mm
1.083 in.
22.9 mm
0.900 in. 17.2 mm
0.678 in.
Gasket must meet insid e surface of custom
application's display opening. This is to provide
a secure and watertight fit.
Use four #8-32 machine screws in the
corners of the unit to mount the display
into an enclosure. Six total screws may
be used for multiple mounting configurations.
345.4 mm
13.6 in. 156.2 mm
6.15 in.
292.4 mm
11.51 in.
141.6 mm
5.575 in.
175 mm
6.888 in.
200.7 mm
7.9 in.