1-26 Chapter 1: 7401-2xxx and 3xxx Product Overview
Operator Display
18289
NCR
Tilt Mount Fixed-Angle Mount
The 7401-2xxx and 3xxx have either a 12.1-inch TFT (active matrix) or a
15-inch TFT.

LCD Adapter Board

The signals from the LCD header on the Processor Board are brought
to the LCD on a harness. Since there are multiple p in configurations
and connector types being used on the LCD, a small adapter board is
used to receive the LCD harness and map the signals into the correct
pin-out for the LCD panel. This board has a connector that plugs
directly into the LCD panel.

LCD Backlight Inverter Module

An Inverter Board supplies power for the LCD Back lig ht, wh ich is a
separate module in the terminal. The inverter has a connector that
receives power, ground, and a Backlight dim m ing sign a l fro m th e
Processor Board. The inverter generates the high voltage necessary to
start and run dual CCFL (cold-cathode fluorescent lamps) Backlights.