4-4 Chapter 4: 7401-4xxx Hardware Installation
Installation Restrictions• Before installing the terminal, read and follow the gu ide lin e s in th e
NCR EasyPoint 7401 Site Preparation Guide and the NCR Workstation
and Peripheral AC Wiring Guide.
• Install the terminal near an electrical outle t th at is easily accessible.
Use the power cord as a power-disconnect device.
• Do not permit any object to rest on the power cord. Do not locate
the terminal where the power cord can be walked on.
• Use a grounding strap or touch a grounded metal object to
discharge any static electricity from yo u r body before s e rv icin g t h e
terminal.
• If the power cord is replaced, it must be replaced with the same
type of cord with the protective shroud.
• Do not route the power cord through openings with sharp edges.
Caution: This unit contains hazardous voltages and should only be
serviced by qualified service personnel.
Caution: DO NOT connect or disconnect the transaction printer while
the terminal is connected to AC power. This can res u lt in sy ste m or
printer damage.
Warning: The 7401 must be mounted securely to prevent a hazard. It
must be installed in accordance with local building codes. When
mounting the terminal on a table top, use care when lifting the
terminal. The approximate weight is 90 lbs. (40.8 kg).