Figure 24. AP Properties

Here you may modify the IP address and Community string. Changes made here will be immediately effective.

If the connection attempt was unsuccessful, a message box will appear informing you that the request had no response. Click OK to close the message box and return to the main screen. Go through the procedure again to retry. If you cannot connect to the AP after three attempts, check that the AP information has been correctly entered in the Host Table and that the Access Point (AP) is functioning.

Managing Configurations

Config

If the AP selection is successful, the Config and View main menu items will be enabled. Click the Config main menu item (or right-click on the AP name in the APMS window) to open a sub-menu.

Figure 25. Config/AP Setting

InstantWave High Rate 11Mbps Access Point 27