LAN, then the SNMP respond packet needs to go through a router-gateway. The default gateway is the path to that router. If you set the correct default gateway, then you can use a PC running APMS located on a different subnet to manage this AP.

All InstantWave Access Points are delivered with a default IP of 192.168.1.1 and a default subnet mask of 255.255.255.0. If you wish to change the defaults, set each AP to its new IP address before introducing it to the open network.

Consult your network administrator for exact settings.

After making changes, click OK to return to the Config sub-menu and click the Reset AP menu item to make the changes effective.

Filter:

The second tab on the box is Filter (Figure 27). This is a one-way protocol filtering mechanism that prevents the AP from transmitting specified protocols from the wired Ethernet LAN into the wireless zone. If you do not require particular protocols on the wireless part of your network, you can save bandwidth by enabling the protocol filter.

Figure 27. Filter (APMS)

InstantWave High Rate 11Mbps Access Point 29