The first is by entering any text in the Passphrase field. Click the Generate button. For 40-bit WEP, it will generate four keys, Key 1, Key 2, Key 3, and Key 4. Select a key number from the dropdown list of the Default Key box. If you do not select a key, key 1 is selected, as it is the default key. For 128-bit WEP, only one key is generated. Click OK.

Another WEP key generation method is to insert the key values directly from the keyboard. Enter your own key into one of the Key 1~4 fields. Select that field number in the Default Key field. If the WEP key is enabled on the AP, all clients must use the same WEP key. Click OK.

Trap Management

Trap Management allows you to setup the configuration of the Trap Server program. When an AP is powered on, or its Ethernet port becomes active, the AP will send messages to the assigned trap server to report these activities.

To assign a trap server, click Trap Management (Figure 33). Assign a station as a trap server by entering its IP address and network port type. Click Add.

To remove a trap server from the list, highlight it and click Delete. Click Delete All to remove all assigned trap servers from the list.

Figure 33. Trap Management

To view trap log information, click Start/Programs/InstantWave High Rate AP/Trap Server to open the following screen.

InstantWave High Rate 11Mbps Access Point 37