ECO MODE
Decreases the amount of power consumed by reducing the brightness level.
1:Decreases the brightness by 25%.
2:Decreases the brightness by 50%.
CUSTOM: Decreases the brightness level as determined by the user.
Refer to the Advanced OSM menu for custom setting instructions.
AUTO BRIGHTNESS
There are three settings for Auto Brightness.
OFF: No function.
1:Adjusts the brightness automatically, by detecting the brightness level of your environment and adjusting the monitor with the best BRIGHTNESS setting*1.
2:Adjusts the brightness automatically for the best BRIGHTNESS setting based on the white display area. The environmental brightness sensor (Ambibright sensor) has no function.
NOTE: Do not cover environmental brightness sensor (Ambibright sensor).
When ÒAUTO LUMINANCEÓ (Page 18, Tag1) is ON, this function is disabled.
*1: Please refer to Page 25 for full ÒAuto BrightnessÓ information.
BLACK LEVEL
Adjust the black level.
Auto Adjust (Analog input only)
Automatically adjusts the Image Position and H. Size settings and Fine settings.
Image Controls
LEFT / RIGHT
Controls Horizontal Image Position within the display area of the LCD.
DOWN / UP
Controls Vertical Image Position within the display area of the LCD.
H.SIZE (V.SIZE) (Analog input only)
Adjusts the horizontal size by increasing or decreasing this setting.
If the ÒAUTO Adjust functionÓ do not give you a satisfactory picture setting, a further tuning can be performed using the ÒH.Size (or V.Size)Ó function (dot clock). For this a MoirŽ test pattern could be used. This function may alter the width of the picture. Use Left/Right Menu to center the image on the screen. If the H.Size (or V.Size) is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous.
English
When H.SIZE value is | When H.SIZE value is | When H.SIZE value is |
wrong. | improved. | correct. |
FINE (Analog input only)
Improves focus, clarity and image stability by increasing or decreasing this setting.
If the ÒAuto Adjust functionÓ and the ÒH.SizeÓ function do not give you a satisfactory picture setting, a fine tuning can be performed using the ÒFineÓ function.
For this a MoirŽ test pattern could be used. If the Fine value is wrongly calibrated, the result would look like on the left drawing. The image should be homogeneous.
When FINE value is | When FINE value is |
wrong. | correct. |
