NEC 5800 2.4ENVIRONMENT SETUP, Setting HOSTS File

2.4ENVIRONMENT SETUP

Set up the environment as explained below.

Setting HOSTS File

Setting of HOSTS file is needed when control is performed via the network. Set the server information, management server information, and management PC information of Power Console Plus into the HOSTS file that is provided/browsed by the TCP/IP of Windows.

IP addresses and host names of all servers and management Server and management PCs that are controlled via the network

IP address and host name of the management server

Use a text editor (e.g., notepad) to add the information to the HOSTS file. (Line feed is necessary at the end of the added lines.)

With Windows 2000, the HOSTS file is C:\Winnt\System32\Drivers\etc\hosts. With Windows 2003 Server, the HOSTS file is C:\Windows\System32\Drivers\etc\hosts.

– 8 –