Step 2
Select a physical drive in the
Ready status.
Click on [Add to Array] button to assign physical drives to the new array.
Click on [Accept Array] button, and then click on [Next] button.
NOTE:: Assign all physical disks used to configure a logical disk to [New Array]. For example, to configure the array of RAID5 level, at least three physical drives are required.
Step 3
Specify the RAID level and size of the logical drives.
Click on [Accept] button, and then [Next] button.
Click on [Advanced] button if you want to set the advanced parameter (e.g., write policy).
– 44 –