Properties
Choose this option to display the controller properties.
Rebuild Rate
Choose Rebuild Rate to select the amount of system resources to be devoted to rebuilding failed disk drives. Click on the slider to select the percentage of system resources to devote to the disk rebuild and click [OK].
NOTE: The higher the percentage, the more computing power is devoted to the rebuild. Choose a low percentage to minimize system performance problems.
IMPORTANT: The higher rebuild rate may cause a system error. It recommends to set to equal to or less than 30.
Rescan
Choose this option to scan all SCSI channels again to update the status of all attached SCSI devices.
– 31 –