Alarm Control
The alarm generates a beeping sound when one or more physical disks fail. The sound continues until Silence Alarm is selected. After a rebuild finishes, a beep signals that the rebuild is done. Choose Silence Alarm at this time to silence the alarm. The alarm settings are:
Setting | Description |
Enable / Disable | When Alarm Control option is selected and if Disable Alarm |
Alarm | appears, the alarm is enabled and can be disabled. If Enable Alarm |
| appears, the alarm is disabled and can be enabled. When Enable |
| Alarm is set, a beeping sound occurs even when all logical drives |
| are online and there are no failed disks after a hot spare rebuild |
| completes. Use the Silence Alarm function to stop the alarm. |
Silence Alarm | Stops the alarm if it is currently beeping. If the alarm is not beeping, |
| it has no effect. |
Fast Initialization
Specify whether to perform fast initialization. Always set to "Enable" (default).
Battery Status
The battery information on a controller is displayed.
S.M.A.R.T. Setting
S.M.A.R.T. Set up a function. Please do not change.
– 33 –