NEC LCD1501 user manual Tilt, Remove Monitor Stand for Mounting, English-4

Tilt

Grasp both sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Disconnect all cables.

2.Place monitor face down on a non-abrasive surface (Figure R.1).

3.Remove the hinge cover (Figure R.1).

4.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.2) the monitor is now ready for mounting in an alternate manner.

5.Connect the AC cord and signal cable to the back of the monitor (Figure R.3).

6.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Figure TS.1

Hinge cover

Non-abrasive surface

Figure R.1

English-4

01_English 4 12/9/02, 4:10 pm