NEC LCD225WXM user manual English, Contents, Quick Start, Declaration of the Manufacturer

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNITÕS POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

English

CAUTION

RISK OF ELECTRIC SHOCK ¥ DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

Declaration of the Manufacturer

We hereby certify that the color monitor MultiSync LCD205WXM (L206T8)/MultiSync LCD225WXM (L226T9) are in compliance with

Council Directive 73/23/EEC: and marked with

Ð EN 60950-1
Council Directive 89/336/EEC:
Ð EN 55022
Ð EN 61000-3-2	NEC Display Solutions, Ltd.
Ð EN 61000-3-3
	4-13-23, Shibaura,
Ð EN 55024
	Minato-Ku
	Tokyo 108-0023, Japan

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type	North America	European Continental	U.K.	Chinese	Japanese
Plug Shape
Country	U.S.A./Canada	EU (except U.K.)	U.K.	China	Japan
Voltage	120*	230	230	220	100

*When operating the MultiSync LCD205WXM/LCD225WXM monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

Contents

UserÕs
Manual
	DVI-D to DVI-D	CD-ROM
UserÕs	(for Europe)
Manual
Audio	15-pin mini D-SUB	Power Cord*
Cable	male to 15-pin mini	MultiSync LCD monitor
	D-SUB male

* Type of power cord included will depend on the where the LCD monitor is to be shipped.

Your new NEC MultiSync LCD monitor box* should contain the following:

¥MultiSync LCD monitor with tilt base

¥Audio Cable

¥Power Cord

¥Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male)

¥Video Signal Cable (DVI-D to DVI-D) (for Europe)

¥UserÕs Manual

¥CD-ROM

*Remember to save your original box and packing material to transport or ship the monitor.

Quick Start

			To attach the MultiSync LCD monitor to your system, follow these
			instructions:
	Macintosh Cable Adapter (not included)		1. Turn off the power to your computer.
			2. For the PC or MAC with DVI digital output: Connect the DVI-D
			signal cable (not included for the U.S. and China) to the connector of
			the display card in your system (Figure A.1). Tighten all screws.
			For the PC with Analog output: Connect the 15-pin mini D-SUB
			signal cable to the connector of the display card in your system
			(Figure A.2). Tighten all screws.
Figure A.1	Figure A.2	Figure A.3	For the MAC: Connect the MultiSync Macintosh cable adapter
			(not included) to the computer. Attach the 15-pin mini D-SUB signal
			cable to the MultiSync Macintosh cable adapter (Figure A.3).
			Tighten all screws.

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

English-1

01_English 1 6/6/07, 8:36 AM