Remove Monitor Stand for Mounting, Removing the Base, English

Remove Monitor Stand for Mounting

To prepare the monitor for alternative mounting purposes:

1.Disconnect all cables.

2.Place monitor face down on a non-abrasive surface (Figure R.1).

3.Remove the 3 screws connecting the monitor to the stand and remove the stand as indicated (Figure R.1). The monitor is now ready for mounting in an alternative manner.

4.Connect the AC cord to the back of the monitor (Figure R.2).

5.Reverse this process to re-attach stand.

NOTE: Use only VESA-compatible alternative mounting method.

NOTE: Handle with care when removing monitor stand.

LCD22WMGXLCD24WMCX

English

Non-abrasive surface

Figure R.1

Figure R.2

Removing the Base

NOTE: Always remove the Base when shipping the LCD.

1.	Place monitor face down on a non-abrasive surface (Figure R.1).
2.	While using your thumbs, press the bottom tabs upward to unlock.	Tab

3. Pull the unlocked base off the stand.

Connecting a Flexible Arm

This LCD monitor is designed for use with a flexible arm.

Please use the screws (4pcs) as shown in the picture when installing. To meet the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under consideration of the weight of the monitor.

The LCD monitor shall only be used with an approved arm (e.g. GS mark).

4 x 12 mm with lock washer and flat washer

12 mm