Wireless
This tab sets the wireless parameters for the device.
<Entry Item>
Classifi- | Parameter | Default | Description | |
cation |
| Value |
| |
|
|
|
| |
|
|
|
| |
| WSL Scram- | Disabled |
| |
WSL | ble |
| This function is not supported. | |
(Original) |
|
| ||
WSL Scram- | 0 to all | |||
| ||||
| ble Key |
|
| |
|
|
|
| |
| WEP | Disabled | Determines whether or not the WEP funciton is used. | |
|
|
|
| |
| Default Tx | Setting is | Selects the WEP key number to use for data transmission. | |
| Key | not allowed. | • 1 to 4 | |
|
| (1) |
| |
|
|
|
| |
WEP | Key 1 | Setting is | Sets the WEP key for WEP encryption. | |
| not allowed. | • Hexadecimal value (0 to 9, A to F) | ||
|
| |||
|
| (A1B2C3D4 | * To perform communications using the WEP function, the | |
|
| E5 | key placed in the default send key number used for trans- | |
|
| 40 bits) | mission must be the same as that placed in the same | |
|
|
| location on the receiver. | |
| Key 2 to 4 | Disabled | ||
|
| |||
|
|
|
| |
| Extended | Disabled | Sets the AP roaming method. | |
| Roaming |
| • Enabled/Disabled | |
| (*1) |
| * When enabled, "AP Login Priority" setting is allowed. | |
|
|
|
| |
Exten- | Roaming | Setting is | Selects the threshold value to initiate roaming. | |
Threshold | not allowed. | • 50 to 150 | ||
sion | ||||
(*2) | (80) | * Roaming is performed when the average RSSI value dur- | ||
Control | ||||
|
| ing the RSSI sampling time is less than this value. | ||
|
|
| ||
|
|
|
| |
| RSSI Sam- | Setting is | Selects the sampling time (sec.) to obtain the RSSI value to | |
| pling | not allowed. | initiate roaming. | |
| Time (*2) | (3 sec.) | • 1 to 10 | |
|
|
|
|
29 |
