Toshiba GN-1010 manual Node Registration

Node Registration

The first time you use the GN-1010, you must perform the “Node Registration”, which automatically detects and registers the GN-1010.

Once the “Node Registration” detects the GN-1010 installed on the network, its informa- tion will be stored in a file. Therefore, it is not required to perform “Node Registration” each time you start the utility.

1.Launch the utility software.

2.Click [Node Registration] from the main menu.

3.Click [Search] to detect an access point.

•MAC address and IP address for each access point detected are dis- played in the Access Point List.

4.From the list, double-click an access point of which the name is registered.

•When an access point cannot be detected, close the utility software. Then, launch it again to detect it.

Furthermore, if the access point cannot be detected after repeating the steps above, see the section "Troubleshooting" (P.52).

20 GN-1010 User’s Manual — Using the Utility Software