
Classifi- Parameter | Default |
|
| Description | |||
cation | Value |
|
|
|
|
| |
|
|
|
| ||||
| Channel | Setting is | Selects the number of wireless channels. The channels of | ||||
|
| not allowed. | 12 to 14 cannot be used even if selected. | ||||
|
| (10) | • 1 to 11 |
|
|
| |
|
|
| * Setting method differs depending on "Extented Roaming" | ||||
|
|
|
| setting. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Extended | Station | Access Point |
|
|
|
|
| Roaming |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Disabled | Auto | One channel only |
|
|
|
|
|
|
|
|
|
|
|
|
| Enabled | One channel only |
| |
|
|
|
|
| is allowed. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| ESS ID | LocalGroup | Enters the name of wireless LAN network on which the | ||||
|
|
| device belongs. |
|
|
|
•Up to 32 alphanumerics
*Communication between the wireless devices with different names is not possible.
Network can be split by changing the name.
| ANY ID | Disabled | Determines whether or not the |
| Blocking |
| has no ESS ID is refused. |
Wireless |
| • Enabled/Disabled | |
Parame- |
| * When "Enable" is set, the | |
ters |
| no ESS ID will be refused. | |
|
|
|
|
| Transmit | Auto (All) | Selects transmit speed of the wireless transmission side. |
| Rate |
| • 1Mb/s |
|
|
| • 2Mb/s |
|
|
| • Auto (1Mb/s, 2Mb/s) |
|
|
| • 5.5Mb/s |
|
|
| • 11Mb/s |
|
|
| • Auto (All) |
|
|
|
|
| Age Time | 5 min. | Selects time (minutes) to keep the wireless device informa- |
|
|
| tion (for AP only) and the MAC address information of the |
|
|
| bridge, which are internally managed. |
|
|
| • 3 to 65535 |
|
|
| * If no communication occurs within the time set here, the |
|
|
| information will be deleted. |
|
|
|
|
| Static Node | Setting is | Sets the MAC address of PC connected to Ethernet side. |
| Address | not allowed. | (For a station of “Infrastructure |
|
|
| • Without MAC Address Designation |
|
|
| • With MAC Address Designation |
|
|
| * If the MAC address is not designated, it will be automati- |
|
|
| cally obtained from the communication data on Ethernet. |
(*1) : Factory default setting for IP address
Unique value is set by using the lower 3 bytes in 6 bytes of Ethernet address.
Ex.: Ethernet Address |
| IP Address |
→ | 10.1.2.3 | |
→ | 10.13.14.15 | |
The first portion “10” is the same. |
| (*2) : When you use only the |
| required. However, when using the |
| devices or using it on the far side of an IP router, you must set these items. |
|
|
28 |