![](/images/new-backgrounds/1299035/29903567x1.webp)
Filter
This tab performs the filter setting regarding MAC address and protocol.
Operation
Button
<Operation Button>
[New] .................. Creates new list.
[Delete]............... Deletes the list previously set.
[Open] ................ Opens the saved list file.
[Save] ................. Saves created list.
<Display Item>
Classifi- | Parameter | Default | Description | |
cation |
| Value |
| |
|
|
|
| |
| Enable MAC | Disabled | Determines whether or not the MAC address filter is used. | |
| Address Fil- |
| • Enabled/Disabled | |
| ter (*1) |
| * When enabled, connection to another AP other than the | |
MAC |
|
| clients which has the permitted MAC address is refused. | |
Address | MAC | - | Displays the permitted MAC address list when “MAC | |
Filter | Address List |
| Address Filter“ is enabled. You can register or delete MAC | |
| (*1) |
| address, one by one, by [New] or [Delete] command. You | |
|
|
| can also load the batch list from the list file, and save a list | |
|
|
| as the list file. Up to 1024 addresses can be registered. | |
|
|
|
| |
| Enable Pro- | Disabled | Determines whether or not the protocol filter is used. | |
| tocol |
| • Enabled/Disabled | |
| Filter |
| * When enabled, transmission of the packet other than pro- | |
Protocol |
|
| tocol is refused. | |
Protocol List | - | Displays the permitted protocol list when “Protocol Filter“ is | ||
Filter | ||||
|
|
| enabled. You can register or delete protocol, one by one, by | |
|
|
| [New] or [Delete] command. You can also load the batch list | |
|
|
| from the list file, and save a list as the list file. Up to 256 | |
|
|
| protocols can be registered. | |
|
|
|
|
(*1) : Applied only to “access point”.
33 |