32 GN-1010 User’s Manual — Functions of the Utility Software
— Extension Speed Control
“Extension Speed Control” is the function which automatically changes the trans-
mission speed according to the RSSI value.
This lowers the speed when the RSSI value becomes low, and heighten the speed
when the RSSI value becomes high.
When using the GN-1010 as a station, you can use this function.
• There is a station logged in to AP at 1, with the transmission speed 11Mbps.
RSSI value is retained at 90 or more.
• When the station transfers to 2 (RSSI 90 or below and RSSI 80 or more),
“Extension Speed Control“ function will be activated and the transmission speed
will be changed to 5.5Mbps.
• When it transfers to 3 or 4, the speed will be changed to 2Mbps or 1Mbps
respectively.
RSSI 90
AP
ST
RSSI 80
RSSI 70
11Mbps 5.5Mbps 2Mbps 1Mbps
1 2 3 4
Transit Transit
Transit