4.Click [Read] to load the setting of the device.

5.Click [OK].

When the password has been set for the selected device, enter it and click [OK].

6.Click the appropriate tab and edit the parameters.

For detailed information of the configuration menu, refer to the section "Configuration" (P.26).

7.After the setting is completed, click [Write].

8.Click [Reboot] to restart the GN-1010.

After restarting the GN-1010, the setting becomes effective.

Click [Read] to check whether the setting becomes effective.

GN-1010 User’s Manual — Using the Utility Software

23

Page 24
Image 24
Toshiba GN-1010 Click Read to load the setting of the device Click OK, Click the appropriate tab and edit the parameters