![](/images/backgrounds/112661/112661-183101x1.png)
6. Using
| SOURCE NAME: |
| Enter a signal name. Up to 18 alphanumeric characters can be used. |
| INPUT TERMINAL: |
| Change the input terminal. |
| LOCK: |
| Set so that the selected signal cannot be deleted when [ALL DELETE] is executed. After executing [LOCK], |
| the changes cannot be saved. |
| SKIP: |
| Set so that the selected signal will be skipped during auto search. |
| When complete, select OK and press ENTER. To exit without storing the setting, select Cancel. Select |
| [SOURCE NAME] and press ENTER to display the Source Name Edit window. You can change source |
| name on this window. Press to display the software keyboard, which you can enter alphanumeric |
| characters. |
ALL DELETE........... | This feature enables you to delete all the registered signals in the Entry List. |
PAGE UP/ PAGE DOWN... Enables you to go to the next page or the previous page.
The following buttons are not available for the currently projecting signals:
1)The CUT and PASTE buttons on the [ENTRY LIST] screen
2)The INPUT TERMINAL button on the [EDIT] screen
NOTE: When all the signals in the [ENTRY LIST] are deleted, the currently projected signal will be also deleted except locked sig- nals.
87