6. Using On-Screen Menu

Setting a new program timer

1.On the PROGRAM TIMER screen, use the SELECT or button to select [SETTINGS] and press the EN-

TER button.

The [PROGRAM LIST] screen will be displayed.

NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.

2. Select a blank program number and press the ENTER button.

The [EDIT] screen will be displayed.

3. Make settings for each item as required.

ACTIVE..............................

Place a check mark to enable the program.

DAY....................................

Select days of the week for the program. To execute the program from Monday to Friday, select

 

[MON-FRI].To execute the program in everyday basis, select [EVERYDAY].

TIME..................................

Set the time to execute the program. Enter time in 24-hour format.

FUNCTION.........................

Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector

 

by setting [ADVANCED SETTINGS]. Selecting [SOURCE] will allow you to select a video source by

 

setting [ADVANCED SETTINGS]. Selecting [LAMP MODE] will allow you to select either [NORMAL]

 

or [ECO] by setting [ADVANCED SETTINGS].

ADVANCED SETTINGS.......

Select power on/off, a type of video source, or lamp mode for the selected item in [FUNCTION].

REPEAT..............................

Place a check mark to repeat the program continuing basis. To use the program this week only,

 

clear the check mark.

102