6. Using
Using Software Keyboard to enter an encryption key
1.Select one of [KEY 1], [KEY 2], [KEY 3] and [KEY 4] and press the ENTER button. The software keyboard will be displayed.
2.Use the SELECT button to select one key and press the ENTER button.
3.After finishing entering the WEP key, use the SELECT button to select [OK] and press the EN-
TER button.
The software keyboard will disappear.
When
ENCRYPTION TYPE: Select [TKIP] or [AES].
KEY: | Enter encryption key. Key length must be eight or greater and 63 or less. |
[AUTHENTICATION] (required for wireless only)
Setting is required for using
[DOMAIN]
HOST NAME........... | Type in a hostname. Up to 15 alphanumeric characters can be used. |
DOMAIN NAME....... | Type in domain name of the network connected to the projector. Up to 60 alphanumeric characters can be |
| used. |
117