3. Projecting an Image (Basic Operation)

Turning off the Projector

To turn off the projector:

1.Press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE?] message will appear.

2.Press the ENTER button

After the projector turns off, the cooling fans keep operating for a while (Cooling-off time).

The cooling fans stop operating when the projector turns off and goes into standby mode.

When in standby mode, the POWER indicator will light orange and the STATUS indicator will light green.

3.After making sure that the projector is in standby mode, turn off the Main Power switch. The power indicator will go out.

About Direct Power Off

The projector has a feature called “Direct Power Off”. This feature allows the projector to be turned off (even when projecting an image) using the Main Power Switch or disconnecting the AC power supply.

NOTE: Before using Direct Power Off, be sure to allow at least 20 minutes immediately after turning on the projector and starting to display an image.

CAUTION

Do not unplug the power cable from the wall outlet or projec- tor when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable. To turn off the AC power sup- ply when the projector is powered on, use the Main Power Switch.

Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings and re- turn to default.

After Use

Preparation: Make sure that the main power is turned off.

1.Unplug the power cable.

2.Disconnect any other cables.

3.Retract adjustable tilt feet if extended.

4.Cover the lens with the lens cap.

 

 

POWER

 

POWER

 

 

OFF

 

 

ON

 

 

 

COMPUTER

 

 

 

VIDEO

1

2

VIEWER

 

 

 

 

 

 

 

COMPONENT

 

 

 

S-VIDEO

 

3

NETWORK

 

 

 

 

E

 

 

 

 

 

M NU

 

 

 

USB

 

 

 

 

 

LAMP

 

 

 

 

 

STATUS

 

 

 

3D.REFORM AUTO.ADJUST SOURCE

ON/STAND.BY

POWER

 

SELECT

 

 

 

 

E

 

 

IT

 

 

 

NT

 

 

 

 

 

ER

 

EX

 

 

 

POWER

 

 

POWER

 

 

 

OFF

 

 

ON

 

 

 

 

COMPUTER

 

 

 

 

VIDEO

1

2

VIEWER

 

 

 

 

 

 

 

 

COMPONENT

 

 

 

 

 

S-VIDEO

 

3 NETWORK

 

 

 

 

M ENU

 

 

 

 

USB

 

 

 

 

 

 

LAMP

 

 

 

 

 

 

STATUS

 

SELECT

 

 

3D.REFORM AUTO.ADJUST SOURCE

ON/STAND.BY

POWER

 

 

 

 

 

 

 

 

 

 

E

 

 

IT

 

 

 

NT

 

 

 

 

 

ER

 

 

EX

34