4. Convenient Features

Viewing Two Pictures

1.Press the PIP button on the remote control.

The PIP/SIDE BY SIDE SOURCE screen will be displayed.

2.Use the SELECT G or button to select the source and press the ENTER button.

The PIP screen or SIDE BY SIDE screen will be displayed, depending on which was selected in the [MODE] set- ting screen.

3.Press the PIP button again to return to the normal screen (single picture).

TIP:

Selecting another source will return to the normal screen.

Selecting a source not supported for the main picture or the sub picture will return to the normal screen.

[POSITION]

This option allows you to select the position of a sub picture in the main picture.

NOTE:

• The default setting is [BOTTOM-RIGHT].

Use the SELECT or button to select the sub picture’s position and press the ENTER button. The options are: TOP-LEFT, TOP-RIGHT, BOTTOM-LEFT, and BOTTOM-RIGHT.

The following adjustments and settings are available for the main picture only.

-Adjusting picture and sound

-Magnifying a picture

The following operations are available for both the main and sub pictures.

-Picture and audio mute

-Freezing a moving picture

44