6. Using
Setting MONITOR OUT Connector [OUT TERMINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT connector during Standby mode.
LAST....................... | The signal from the last COMPUTER 1, COMPUTER 2 or COMPONENT input will be output to the MONI- |
| TOR OUT connector. |
COMPUTER 1, 2..... The signal from the COMPUTER 1 or COMPUTER 2 input will be output to the MONITOR OUT connector.
COMPONENT.......... | The signal from the COMPONENT input will be output to the MONITOR OUT connectors. |
NOTE: When [COMPUTER 1] or [COMPUTER 2] is selected for [AUTO POWER ON(COMP1/2)], the [OUT TERMINAL] feature is not available.
128